DEWALT Planer Review – Model DW735X

By Todd Fratzel on Power Tools, Woodworking

DEWALT DW735X 13″ Three Knife, Two Speed Thickness Planer

When choosing shop machinery for my new wood shop one of my biggest constraints has been choosing equipment large enough to handle decent size projects yet small enough to fit into a medium size shop. The selection of a thickness planer basically comes down to two size categories; small portable (albeit real heavy to be portable!), or very large stand alone machines. The stand alone machines are far too large for my shop so I was left searching the 13″ planer category.

DEWALT DW735X Thickness Planer

It didn’t take me long to zero in on one particular planer and that was the DEWALT DW735. After reading several reviews it was clear to me that this was a hidden jewel among the DEWALT product lineup. Below are some of the key spec’s on this tool and my take on this super-charged thickness planer from DEWALT.

Specifications and Features – Model DW735X

  • Amps: 15.0 Amps
  • No Load Speed: 20,000 (motor) / 10,000 (cutterhead) rpm
  • Max Depth of Cut: 1/8″
  • Depth Capacity: 6″
  • Width Capacity: 13″
  • Tool Weight: 92 lbs
  • Powerful 15 AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
  • Three knife cutter-head delivers 30% longer knife life and makes knife change faster and easier
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
  • 19-3/4″ cast aluminum base is 2X more rigid than a standard 10″ base and folding tables
  • Automatic carriage lock reduces the movement that causes snipe without the need for manual engagement by the user
  • Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass
  • Extra-large turret depth stop allows users to return to most frequently used thicknesses with ease
  • includes infeed and outfeed tables and an extra set of knives

Simple Setup / Ease of Use

DEWALT DW735 Depth ControlBefore I even ran a piece of wood through this planer I was impressed. Out of the box the unit is very heavy and clearly a heavy duty machine. The DW735 is so easy to setup that even a complete novice to thickness planing can set it up in a mater of minutes. It comes with the blades already installed and all the pre-set stops factory adjusted.

To start you simply insert about an inch of the board you want to plane into the end of the planer and lower to cutter head down onto the board. Next you pull out the board and lower the head as much as you’d like to take off the first cut. Turn the machine on and watch it do it’s magic, it’s as simple as that!

It’s so simple to setup that I honestly figured I’d just gotten lucky, however, I quickly learned the DW735 is just that easy to setup. Even more impressive is how smooth the controls operate.

DEWALT DW735 Chain Drive for Cutter Head Height

The cutter heads are raised and lowered with a very smooth turning handle on one side of the unit. For each full rotation of the handle the cutter heads raise or lower 1/16″. This is nice because it makes matching another previously milled pieces thickness. The picture above shows the chain that’s used for raise and lower the cutter heads. The chain drive speaks volumes to the quality and durability of this unit.

DEWALT DW735 Removal Gauge

DEWALT DW735 Thickness GaugeEasy To Use & Read Gauges

There are two gauges on the DW735 and they are both easy to read and use. The removal gauge shown above shows how much thickness will be removed but it also offers a handy chart suggesting the maximum to remove per pass based on the width of the board. The thickness gauge shown on the right shows the total final thickness that the board will be after passing through the planer.

The thickness gauge was spot on straight out of the box. It can easily be adjusted if necessary by loosening two screws and moving the red gauge marker. This gauge really is just a visual reminder of how thick the piece is. For repetitive planing of multiple pieces to a set maximum thickness the user can use the Turret Stop located on the left side of the unit. The Turret Stop has pre-set thicknesses of: 1/8″, 1/4″, 1/2″, 3/4″, 1″ and 1-1/4″. This is a great feature when trying to plane lots of boards to the same final thickness.

Power

Power is tough to describe in words. Soon I’ll also create a video review for this tool so you can see first hand what I mean about power!. I recently purchased some 8/4 Maple, Purple Heart and Walnut for cutting boards. The boards were about 10 inches wide. I was blown away as I started my first pass at 1/16″ and the planer didn’t even moan. Board after board the DW735 chewed through layer after layer of wood with ease.

Todd Fratzel using DEWALT DW735 Planing WalnutDust / Chip Collection

The one thing I was most concerned about with this small planner was dust and chip collection. I’ve got a pretty robust dust collection system in my shop, however the amount of dust and chips that a planer produce gave me reason for concern. The DW735 has a built-in chip blower mounted at the rear of the unit. It helps push chips out from the unit and  into the dust collection pipe. This combined with the dust collector creates a system that works exceptionally well.

DEWALT DW735 Chip Blower

If you look at the photo above you’ll see that they have connected a chip blower directly to the motor. There is a shroud over the blades which connects to the chip blower. This system works so well that when I removed the cover on the planer there was virtually NO dust inside even after running over a 100 feet of hardwood through the planer already.

DEWALT DW735 Dust Port

The dust port is located at the rear of the unit above the outfeed opening of the planer. The location of the dust port is one of the very few complaints I have about the DW735.  Because the hose enters the rear of the unit it sits directly above boards coming out the finished end of the planer. This means you’ve have to keep the hose lifted up and out of the way so the exiting board doesn’t run into the hose. This is a minor issue but one I’d like to see addressed in the next model.

The dust and chip collection work flawlessly on the DW735.  Each time I’ve used the DW735 I’ve been able to capture all of the chips and dust. Planing is one of the tasks in the woodshop that creates the most volume of chips and dust. Because of the built-in booster this planer is able to easily capture all the dust regardless of cut depth and board width.

DEWALT DW735 Cutter Head Blades

Three Blade Cutter Head

The cutter head uses three blades that are really easy to change. One Allen wrench is used to remove the top planer cover, dust cover and the blade bolts. Changing the blades literally only takes about 15 minutes and I found it to be really easy. In the image above you can see one of the blades and the bolts that hold it in place.

DW735 Accessories

DEWALT DW7350The DW735X model comes with some extras that the DW735 does not. You get an extra set of blades and you get the two support wings that easily attach to the front and rear for added material support. Both of these are great add-ons and worth the added cost.

I also have the DW7350 – Mobile Thickness Planer Stand. The stand is also built from high quality materials and rivals any of the mobile stands I own. In fact, if you’re going to put this on a stand I recommend you buy the DEWALT version compared to an after-market version.

Overall Performance

DEWALT makes lots of great tools and I seldom find issues with any of them. In this situation they have an AMAZING tool with the DW735 Thickness Planer. In fact, I would say it’s one of the best overall performing tools that I’ve ever reviewed.

Over the last few months I’ve planed all kinds of wood from soft pine to hard maple, purple heart and even walnut. Each time I’ve planed the material the finish is so smooth it hardly even needs to be sanded. The ease in setting up and planing pieces of wood is incredibly impressive. Combine all that with a very well built product and you have a tool that I would recommend to anyone.

One of the biggest complaints with smaller planers this size is snipe. I’ve planed well over 100 lineal feet of material and I have yet to find any snipe at all. The automatic carriage stop feature clearly solves this long standing design issue for planers. I can only hope that DEWALT continues offering this great product for many years to come.

In my opinion this is a perfect planer for small and medium size woodshops. If you’re in the market for one be SURE you put this at the top of your list. Not sure what planer is best for you? Check out another article I wrote: Best Benchtop Thickness Planer

You can buy the planer and stand online at the following links:

About the author

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

All posts by Todd »

Not what you're looking for?

Search for more articles here. Enter keywords like, 'insulation' or 'kitchens' etc to find your topic.

4 Comments

  1. Bob Blume says:

    This is a great little planer. Better than my personal DW734…though I’ve put this bugger through just about everything I shouldn’t, and it’s going strong!

    Thanks for this review – I might just be headin out to take a peek at this new shiny version…

    BB

  2. John Monju says:

    As a long time owner of this planer I agree with everything that you said about it. I do however feel that you overlooked it’s one real weakness, it’s blades. I have nicked the Dewalt blades on PINE! This results in ridges on the boards that need to be sanded. I have had much better results with aftermarket blades.

    • Todd Fratzel says:

      Thanks John – I’ve had mine for years and knock on wood no issues yet. What blades have you had the best luck with?

Leave a comment

Be nice. Keep it clean. Stay on topic. No spam.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Copyright © 2009-2023 Front Steps Media, LLC. All Rights Reserved. Home Construction & Improvement™ is a Trademark of Front Steps Media, LLC.