IRWIN Marples Saw Blade Giveaway

By Todd Fratzel on Giveaways, Power Tools

IRWIN Marples – Woodworking Series Blades

Earlier this year IRWIN Tools introduced several new products including their new line of Marples Woodworking Series Saw Blades. Marples blades are made in Italy to the highest standards of precision for woodworking and carpentry. IRWIN Marples blades are specifically designed for extended life, flawless finish and ultimate precision.

The new lineup includes 11 blade size / tooth configurations including:

10 Inch Blades

  • 10″    24T    ATB         .098″/2.5mm    15­°    10°    5/8″    Table Saw
  • 10″    40T    ATB         .098″/2.5mm    15­°    10°    5/8″    Table/Miter Saw
  • 10″    50T    ATB+R   .098″/2.5mm    15­°    15­°    5/8″    Table/Miter Saw
  • 10″    60T    ATB+R   .098″/2.5mm    10­°    15­°    5/8″    Table/Miter Saw
  • 10″    80T    Hi-ATB   .098″/2.5mm    10­°    30°    5/8″    Table/Miter Saw
  • 10″    84T    TCG          .098″/2.5mm    5°    NA       5/8″    Table/Miter Saw

12″ Inch Blades

  • 12″/305mm    40T    ATB    .098″/2.5mm    15­°    10°    1″    Miter Saw
  • 12″/305mm    60T    ATB    .098″/2.5mm    10­°    15­°    1″    Miter Saw
  • 12″/305mm    80T    Hi-ATB    .098″/2.5mm    10­°    30°    1″    Miter Saw
  • 12″/305mm    96T    Hi-ATB    .098″/2.5mm    -2°    30°    1″    Miter Saw
  • 12″/305mm    100T    TCG    .098″/2.5mm    5°    NA    1″    Miter Saw

IRWIN Marples Blades In My Shop

I’ve been using the new Marples blades in my woodshop for several months and I’m VERY pleased with them. I’ve actually installed them in my large Delta Uni-saw and my Bosch Miter Saw. Both are working beautifully and meet my very high standards for producing very nice accurate and smooth cuts. I plan on testing them longer before I make any decisions about my current blade of choice but right now as it stands these are keeping up with my previous  “red” favorite quite nicely.

Enter For A Chance To Win a 10″ – 50 Tooth Marples Blade

Would you like a chance to win your own 10″ – 50 Tooth Marples Blade?  There are THREE different ways to enter this contest and you may enter each option once per household. 

PLEASE READ THE FOLLOWING DIRECTIONS CAREFULLY!

You may enter each one of the following 4 options once per household. PLEASE ONLY LEAVE ONE COMMENT, You can list all your entries and we’ll total them up. PLEASE DO NOT LEAVE Multiple comments.

  1. Leave a comment below telling us how you would use the new Marples 10″ 50 Tooth Bade.
  2. Facebook – Visit our Facebook Fan Page and LIKE us. Leave a comment on the wall telling us what you think of IRWIN’s new Marples Woodworking Blades.
  3. Facebook – Please visit IRWIN’s Facebook Fan Page and LIKE them!
  4. Newsletter Sign-Up – One of the best ways to keep up to date with our great giveaways, home improvement advice and tool reviews is signing up for our FREE weekly newsletter. In order to qualify for this entry you MUST sign-up and finish the opt-in process after you receive the welcome email. To sign up follow this LINK.

Fine Print

Entries must be received by 11:59 PM EST on October 31, 2012. The winner will be announced on November 1, 2012.

Only residents of the U.S. are eligible. One entry per household per each method above for a maximum total of four. Spam entries will not be counted. Spam entries are determined at the sole discretion of Front Steps Media.

About the author

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

All posts by Todd »

Not what you're looking for?

Search for more articles here. Enter keywords like, 'insulation' or 'kitchens' etc to find your topic.

38 Comments

  1. manuel alberto delgado says:

    I WOULD USE THEM ON HELPING MY UNCLE REMODLE HIS GARAGE

  2. Dymphna says:

    I was given a table saw hut haven’t used it yet ….. think I’ll make some outdoor shelves

  3. I’d use it to build a platform for a dolly to create camera movement for a film!

  4. Scott Kershaw says:

    I have been coveting these blades since I read a review of them in a magazine publication. I would love to put this in my table saw and use it for boxes with a cross-cut sled. This blade would be fantastic!

    I have left a comment on Facebook and I am already subscribed to the newsletter. Thanks!

  5. Robert Steinbring says:

    I would love to have a set of these blades, my wife and I are planning on some remodeling and installation of some new additions to our house and the new blades would be a huge help.

  6. Sue D says:

    We have lots of home improvement projects we are working on –new saw blade would be very helpful.

  7. Tommy says:

    I pan on using the blade for several projects including railings, cabinets, and flooring.

  8. Sue D says:

    I am a newsletter subscriber.

  9. Janet morrison says:

    I would give this to my nephew. He has a lot of home projects that needs completed

  10. Mary Ruth says:

    I would use these blades to finish a bookcase. have heard good things about them!

  11. Mr.HoneyDo says:

    Love to have these, outfit both my table and miter saws with the best blades out there!

  12. paintergal says:

    Love to win! Currently I don’t have a project in mind, but as soon as we sell our house and move into a new one I’m sure there will be lots of things planned.

  13. Zoltan Almasi says:

    Winter will be here soon and I will put the golf clubs away and will be making a lot of sawdust. This will be a great finish blade for my winter projects.

  14. Stewart says:

    I’ll try it on my miter saw

  15. CJ says:

    Used on Plywood for custom cabinets, building 1 car garage/workshop, on MDF for and American Girl doll christmas present for my niece and other MDF gifts for family.

  16. Shannon says:

    I’d use it to make bunk beds for my kids.

  17. Theresa Dell says:

    My husband could use these for his job as a carpenter.

  18. Cindi says:

    My husband is helping our oldest son work on
    a home, that our son just purchased!
    I am sure that they would have plenty of uses
    for this superior saw blade…
    Many thanks, Cindi

  19. Cindi says:

    I “Like” you on Facebook.
    Also, I left a comment…
    Again, many thanks to you!
    Cindi

  20. Cindi says:

    I “Like” Irwin Tools on Facebook.
    Thanks, Cindi

  21. Cindi says:

    Also, I am an email newsletter
    subscriber of yours…
    Many thanks, Cindi

  22. John says:

    I’m attempting to viynl side my house. I’m doing a lot of ripping to pad out the moldings ect… I have a dull Diablo blade on my table saw. A new blade would be very helpfull. I found your site while doing a search for some “how to’s” regarding my porch cieling. Your site is very helpfull so far. Thanks!!!

  23. Derek says:

    Use it on my miter for replacing my baseboards and other trim I’m upgrading

  24. Steve says:

    This would be perfect for my miter saw, and using it for cutting the Crown Molding I will be putting up in the house.

  25. Mike Whaley says:

    I would use it on everyday home repairs and any remodeling project I tackle. I am also a newsletter subscriber.

  26. Steve says:

    I would love to use it in my miter saw for trim jobs, crown molding, and such.

  27. Bill Koetter says:

    I make cabinets and would love to try one of these out in my table saw….. Better yet how about two so I can throw one in my radial arm saw as well!

  28. Jeff Damhoff says:

    I would like to try out an Irwin blade

  29. William says:

    Liked on Facebook and liked Irwin’s on Facebook.

  30. Justin Prewitt says:

    I would use it on my Dewalt 10in miter saw. These blades a amazing. No saw marks. I need another so I can get rid of some old ones.

  31. Tamar says:

    We just bought a house so it would be helpful in the DIY home renovation projects.

  32. I would use the blades during the remolding of my 1890 folk farm house.

  33. Sonya Allstun says:

    we are remodeling out bathroom and would use it for that

  34. Neal Marrison says:

    I am beginning to make butterfly houses, bird houses, bat houses, etc. for a retirement income. I’ve got a 10″ mitre saw but haven’t been real satisfied with the different makers blades I’ve tried. Would like to try an Irwin blade.

  35. Scott Fagerstrom says:

    Just a few projects going on, and a new blade such as this would be a whole lot better for building custom kitchen cabinets then the one in the table saw now. Cannot wait to get started with the new blade! Did I mention that these will be made out of Hickory?

  36. Adrian Lamont says:

    I would use it to build my kitchen cabinets.

  37. Jane says:

    We are remodeling the house and can use some new saw blades.

  38. Joni chadwell says:

    WE ARE GOING TO BE CUTTING BOARDS TO COVER THE INTERIOR WALLS OF OUR NEW GARAGE

Leave a comment

Be nice. Keep it clean. Stay on topic. No spam.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Copyright © 2009-2023 Front Steps Media, LLC. All Rights Reserved. Home Construction & Improvement™ is a Trademark of Front Steps Media, LLC.