So here’s the stats on John Deere 3.5 cf tow behind broadcast spreader:
– 175 lb box capacity with a volume capacity of 3.5 cubic ft
– All stainless steel interior hardware, shaft and agitator to prevent corrosion
– High speed, 6:1 reduction glass-filled nylon gears provide the widest spread pattern at the slowest speeds
– Fully enclosed gearbox eliminates down-time and maintenance
– Autoflow feature stops the flow of materials automatically to prevent burns
– Directional spread-pattern control feature provides positive shut off along sidewalks and driveways
Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…
Estimating How Many Nails for a New Roof When it comes to estimating materials for…
Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…
Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…
Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…
Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…
View Comments
bought one used it 3 times flow control is plastic and it broke. John deere cannot find parts for this spreader. The plastic flow controle is no dependable. wish I bought better spreader.
What a piece of crap! One use and the plastic nib in the flow control broke! Must be DESIGNED and MADE in CHINA. No respectable engineer would design something like that. Buy another brand.
gear stripped in mine. Contacted JD for parts and was directed to local. Neither had the part.Still working on it. Any suggestions for parts?
Not sure....i've used mine many times with no problems. Have you tried to order the part online from JD? I know you can order any part online and have it shipped to a local dealer.
same with our control,cheap plastic.
we fixed it with a piece of flat stock that we drilled a 1/2" hole in and a small hole at the bottom to accept the cable. put two 1/2" flat wshers on either side of the flat stock when you replace the original control handle for support.
WORKS GREAT. also use a hose clamp or two to secure the cable to the handle so it does not break
Brinly makes this spreader for JD. Check them for parts. BTW, if someone wants one of these go to HD and buy the black Brinly. Same exact spreader off the same line. $60 cheaper because your not paying for the green paint and name.
The small plastic gear in the gearbox stripped after less than a year of use. The rate selector control is very unreliable. JUNK!
Pins kkep breaking on axle and now the gears stripped and I can't get the parts. I also had the plastic control break and had to replace it with a throttle cable for a lawn mower. JD told me they do not make these and did not know how to get parts. This thing was a bad purchase as it is junk.
@ Mike - You're not the first to make the same comments. I have used mine now for 2 years with no problems. However, it seems more people comment on the poor quality. It seems another manufacturer is building these for JD. It's a real shame that JD is not standing by the product.
Same problem here,gear stripped and have not ordered parts
but it look like no need.I guess i will just scrap.
Bill - Sorry to hear that....mine is about to start it's 3rd season and so far (knock on wood) I haven't had any troubles.
i purchased this John Deere pull behind spreader and my third time using it ,it broke. come to find out the pin that holds the plastic gears in place backed out and stripped my gears. does anyone know where i can buy another gear box assembly for this ?
Good luck finding replacement parts!! This is a piece of junk... Same problems other guys are having. The flow calibrator broke, cheap plastic. I've been brought up to believe that if it is green you have a reliable, strong product with no headaches. It has really made me think b4 i spend a lot $$$ on junk. where was this made anyway??? If it USA I'm sure I would not be writing this, and I could easily find parts....
First, I am a Farmer, My goal was to change out all my equipment to John Deere brand. The Key word is "W#AS". Here this.. John Deere. I have a John Deere 310E Backhoe, numerous attachments to my tractor (which is an old non John Deere product. Then I purchased this Spreader LP22756, to fertilize my yard and spread seed for my deer food plots My Flow Control assemble is also screwed up. I spent hours searching the web for parts, to no avail. Tomorrow I will dissemble the controls and attempt a modification.