Paslode Nailers

One of the really great cordless tools on the market are the Paslode cordless nailers. Paslode nailers are completely cordless, hoseless and compressor free! The Paslode nailers run on a combination of a patented fuel cell plus battery to deliver the same performance as pneumatic nail guns running off compressors.

Paslode Cordless Framing Nailer

The Paslode cordless framing nailer is one of the best cordless tools that my crews use on the job. This extremely powerful and versatile framing nailer makes any remote job a breeze. The Paslode cordless framing nailer can drive full or clipped head nails from 2 inches to 3-1/4 inches long. While this nailer won’t keep up with air nailers on a speed test they certain do match up on power. That’s why I recommend buying the Paslode 900420 Cordless IMCT Framing Nailer for $330 with FREE shipping. This nailer features:

  • Compatible with Full & Clipped Head 2-inch to 3-1/4-inch nails
  • Depth-of-drive adjustment; high-visibility load magazine; long, narrow nose
  • Comfortable “sure grip” and soft trigger
  • Includes battery, charger, belt hanger, plastic carrying case, safety goggles; optional fuel cell not included
  • 12 inches; 6.9 pounds with battery; 5-year warranty

Paslode Cordless Finish Nailer

If you’re looking for a great cordless finish nailer then Paslode makes one of those as well. The Paslode Cordless 16-gauge Angled Finish Nailer features:

  • 1-1/4-inch to 2-1/2-inch cordless 16-gauge gas angled finish nailer with non-mar tip and sight lines
  • Depth-of-drive wheel with probe position-indicator; locks tool at 10 nails to prevent blank firing
  • Comfortable in sure grip-inch and soft trigger
  • Includes nailer, battery, 2-hour charger
  • 11-1/2 by 10-3/4 by 3-1/4-inches; 4.9-pounds with battery; 5-year warranty

You can buy the Paslode Cordless 16-gauge Angled Finish Nailer for $321 with FREE shipping.

Todd Fratzel

I'm full time builder for a large construction company in New Hampshire. I run their design-build division that specializes in custom homes, commercial design-build projects and sub-divisions. I'm also a licensed civil and structural engineer with extensive experience in civil and structural design and home construction. My hope is that I can share my experience in the home construction, home improvement and home renovation profession with other builders and home owners. I'm also the Editor-in-Chief and Founder of Tool Box Buzz. Please feel free to contact me if you have any questions, suggestions or you'd like to inquire about advertising on this site.

Share
Published by
Todd Fratzel

Recent Posts

Framing Stick Nailer vs Coil Nailer

Which is Better a Stick Nailer or Coil Nailer? Framers have many choices in nailers…

9 months ago

How Many Roofing Nails Per Square of Shingles

Estimating How Many Nails for a New Roof When it comes to estimating materials for…

10 months ago

Composite / PVC Decking – Layout Tips & Advice

Composite / PVC Decking Layout Tips and Advice Composite and PVC decking have really changed…

10 months ago

Benefits of an ERV System (Energy Recovery Ventilator)

Benefits of ERV Systems (Energy Recovery Ventilator) If you're building a new home or doing…

2 years ago

Vermiculite Attic Insulation Abatement

Vermiculite Attic Insulation If your home was built before 1990 there is a chance it…

2 years ago

Nuisance Tripping of AFCI (Arc Fault) Circuit Breakers

Arc Fault (AFCI) Circuit Breakers Tripping Often An arc-fault circuit interrupter (AFCI) or arc-fault detection…

2 years ago